Recent Posts
- Layer multipliers for flat film and sheet
- Topic suggestions
- Flat die nanolayers
- Nano-layer generation
- Nano-layer optical performance
- Nano-layer films
- Lifecycle energy consumption for cups
- Scavenging Hexanal from a package
- Information on sustainability of polymers
- Measuring rancidity
Recent Comments
- Mariana Ramirez on What is the standard method for measuring gas permeability of plastic film?
- kcidlj on Dermal-patch manufacture
- Robert Knoll on How green is PLA?
- Rich Eichfeld on How green is PLA?
- Chris on How green is PLA?
Most Commented On
- Matte surfaces (8)
- Differences in film properties and manufacturing methods used to produce them (3)
- How green is PLA? (3)
- Improving moisture barrier (2)
- Orientation in Films-Part 1 (2)
Archives
- November 2008
- October 2008
- September 2008
- August 2008
- July 2008
- June 2008
- May 2008
- April 2008
- March 2008
- February 2008
- January 2008
- December 2007
- October 2007
Blog
Metallizer process study
July 26, 2008
Last October at the AIMCAL Fall Technical Conference, I presented a paper on a metallizer process study I conducted. It has recently been published in the July issue of “Vacuum Technology & Coating,” starting on page 44. For those of you interested in this technology, it is a very good magazine with articles relating to vacuum and vacuum web-coating technologies.
You can visit the Website (www.vctmag.com) and review the past magazine editions and sign up for a free subscription. To review my article, you can follow this link (http://vtcmag.com/) to the main page and then click on the July 2008 issue. Then move to page 44 to read the metallizing process article. AIMCAL will also have the presentation with the audio of the talk on their Website some time this month.
Posted by Eldridge M. Mount on July 26, 2008 | Comments (0)