Substrate Secrets 
Recent Posts
- ANTEC Conference
- Not too technical
- Extrapolation, Comparison and Use of Polymer Melt Viscosity Data using curve fit data
- Melt disturbance onset from increasing line speed
- Viscosity driver of coextrusion melt disturbance
- Coextruding films without defects
- PVC-PET shrinkage and shrink labels
- The impact of polymer density on substrates
- FDA approval of a film
- Curl of coextruded films
Recent Comments
- rakatin on Substrate surface quality
- Eldridge Mount on Temperature profile on a chill roll
- Jimmy on Temperature profile on a chill roll
- Eldridge Mount on Reply to Jimmy's question
- juan on Dimensional stability considerations
Most Commented On
- Matte surfaces (4)
- Differences in film properties and manufacturing methods used to produce them (2)
- Dimensional stability considerations (2)
- Reply to Jimmy's question (2)
- Temperature profile on a chill roll (2)
Archives
Blog
Link This | Email this | Blog This | Comments (0)
What's coming
What's coming
December 8, 2007
In the coming days and months, I will be reviewing various film and substrate manufacturing methods and how that affects substrate properties. If left to myself, I will pick an order which I think is interesting, but I can be managed so If you have particular questions or want to know something special about a substrate, ask me and I will answer, and if I don't know the answer, I'll find out what the answer is. So let me know what you are thinking. I can be reached through the blog or an email to emmount@earthlink.net
Posted by Eldridge M. Mount on December 8, 2007 | Comments (0)
Industries: Coater/ Laminator
Advertisement
Advertisements
