In 12 different shades

Co. introduces its new KOLDfoil line of cold foils in 12 different shades of silver, gold, blue, red, green and violet. The KOLDfoil formulations are available for the cure-tru or conventional cold foil printing process. Cold foil was introduced to the flexographic printing industry in the late 1990s.

AMAGIC FOILS , 949/474-3978, www.gocold.com

Ergonomically sound

Featuring a heavy-duty steel frame, heavy-duty cam carriage bearings and roller-type wheel bearings, the TL800 roll handling cart is an ergonomically sound and safe transporter of rolled materials, co. says. Optional attachments include an electric hoist with a 12-V sealed, deep cycle battery and onboard battery charger. It can also be equipped with an electric tip lift with pneumatic tooth release, a rigid probe, swivel cradle or a roller boom. The cart will handle roll capacities up to 800 lbs. depending on the configuration of the load.

TILT LOCK, INC. , 800/999-8458, www.tiltlock.com

Go from computer to plate

The Prosetter 102 computer-to-plate device images a maximum of 12 plates per hour at 2,450 dpi. Designed to grow with customers' production needs, the platesetter can be upgraded with options including internal punch, a faster version imaging 18 pph or a fully-automatic unit with co.'s single cassette loader with 100 to 150-plate capacity or multi-cassette loader with up to 400 to 650-plate capacity.

HEIDELBERG USA, INC. , 888/472-9655, www.us.Heidelberg.com

Debuts at NPE 2006

In accordance with the Custom Engineered Die System, which will debut at NPE 2006, June 19–23 in Chicago, co. designs and builds ready-to-operate assemblies for installation between the extruders and the equipment downstream of the die lip exit. By integrating the die with all the components that work with it, the system increases the efficiency of the entire production line, co. says.

EXTRUSION DIES INDUSTRIES , 715/726-1201, www.extrusiondies.com

For large-diameter rolls

In order to assist film and sheet makers who deal with large-diameter rolls, co. created the gripper, a mechanical arm for its three winders — models 1002, 1002DS and 1027S. The arm transfers the weight of the rolls from the shaft to the arm. This pneumatic device hooks onto the end of a winding shaft, lifts it and swings it away from the machine, maintaining its hold until a cart arrives for roll removal.

BATTENFELD GLOUCESTER ENGINEERING CO., INC. , 978/282-9268, www.bge.battenfeld.com

For self-adhesive labeling applications

Co. has initiated development of a new label paper grade for self-adhesive labeling applications used by breweries. This move is in response to the growing interest from breweries seeking to reduce material costs, improve production efficiency and use environmentally-friendly labels. This label paper is expected to be released during the second quarter of 2006.

STORA ENSO PACKAGING BOARDS , 715/345-8060, www.storaenso.com

For heavy paperboard

Co.'s turret rewinder for large rolls of paperboard and paperboard laminations can wind rolls up to 90 in. in diameter at speeds up to 1,500 fpm. Paperboard and laminations up to 38 pt can be automatically cut and transferred to a fresh core at full line speed and then wound into a full-diameter roll using the surface/center winding technique.

FAUSTEL, INC. , 262/253-3333, www.faustel.com

Handles roll diameters up to 47 in.

The FILMATIC Tx dual turret winder is an evolution of the FILMATIC T model. Like the T model, it also features center, gap and reverse winding capabilities, as well as adhesive-free web transfer. But unlike its predecessor, it can handle a roll diameter of either 40 or 47 in., whereas the T model can handle a 31.5-in. diameter. Another difference is that it is available in a face-to-face or back-to-back configuration that places two winders alongside one another.

WINDMOELLER & HOELSCHER CORP. , 800//854-8702, www.whcorp.com

Runs metallized film as fast as paper

The GS-4 series, high-speed roll packaging system can run metallized films at the same production rate as paper. This automated production line for rolled, wrapped and labeled products has speeds up to 820 fpm or 75 rolls per minute. The standard range for rolls is 1.25 to 2 in., with larger or smaller diameters available. Web widths are 31.5 to 40 in. and cut lengths are electronically adjustable in millimeter increments from 3.3 to 40 ft., with optional lengths up to 165 ft.

ELSNER ENGINEERING WORKS, INC. , 717/637-5991, www.elsnereng.com

Features 40:1 tension range

Co.'s ULTRA line, washdown duty, UPB load cell has a 40:1 tension range and noise immunity. With a corrosion- and chemical-resistant sealed design, this under-pillow-block style load cell offers an ideal solution for demanding industrial environment, co. says. It is designed for use with pillow block bearings and rotating shaft installations. It can be mounted at any angle and used for retrofit or new machinery.

CLEVELAND MOTION CONTROLS , 216/524-8800, www.cmccontrols.com

Effective for a variety of surfaces

Frostbite™ is a freezer-grade, hot melt adhesive with excellent initial tack and adhesion to flexible packaging and varnished paperboard packaging when applied at freezer conditions, co. says. The adhesive will also adhere to a variety of surfaces despite certain amounts of frost and/or moisture. It also works, when applied at room temperature, with highly textured surfaces like wood products, low-energy plastics and oily surfaces.

SPINNAKER COATING , 800/543-9452, www.spinnakercoating.com

For low- to medium-volume needs

Built for low- to medium-volume requirements, the D-series hot-melt units feature a positive displacement, motor-driven gear pump that offers continuous pulse-free output and can be used with spray, ribbon coating, direct contact and high-speed jetting adhesive dispensing guns. The solid-state controls, RTD temperature sensors and thermostatic temperature control optimize system performance, co. says.

SHURE-GLUE SYSTEMS, INC. , 513/874-5581, www.shure-glue.com

Profiles screen dots in three dimensions

The PremiumSetter 1600 uses a high-resolution laser to directly engrave flexographic plates and sleeves based on elastomer materials. It is controlled by a newly-developed 3D-Rip, which enables each individual screen dot to be profiled in three dimensions.

HELL GRAVURE SYSTEMS GMBH , 49/431-2377-0, www.HELL-Gravure.de

Features easy-change bladder system

Co.'s stainless steel air chuck can be washed down with no possibility of oxidation. It features an easy-change bladder system, split clamp securing for shaft mounting, O-rings in bore for air connection and a fixed core stop. An adjustable core stop is available as an option. Many sizes and configurations are available.

JRC WEB ACCESSORIES , 973/625-3888, www.jrcweb.com

Protects rolls and spools

Co. offers PolyGuard™ core plugs to protect the quality and integrity of rolls and spools. There are eight series of plugs in over 20 sizes to guarantee a core plug to fit any application. Molded from high-impact resin, the co.'s most versatile core plug has 12 supporting ribs and a dish-shaped bottom for extra strength and durability. The lugs are on the circumference of the plug to make up for variation in the inside diameter of the cores.

NIAGARA CAPS & PLUGS , 800/458-0465, www.niagaracapsandplugs.com

For stretch-films market

Six new DOWLEX™ polyethylene resins and one new ELITE™ Enhanced PE resin has been launched by co. These resins are manufactured using hexane comonomer and will be targeted at a variety of applications in the consumer liner and stretch films markets.

THE DOW CHEMICAL CO. , 800/441-4369, www.dow.com

Cleans extremely thin materials

Co. receives another patent for its web and parts cleaning systems. The new face plate designs covered by this patent allows the web cleaners to clean extremely thin materials like tissue paper and thin plastic film at very low to very high line speeds. Also, webs with low to high tension can be cleaned without damage to the web, co. says. The web cleaners are available for any web width and include active static control equipment.

ELECTROSTATICS, INC. , 215/513-0850, www.electrostatics.com

Measures curability of inks, coatings

The CON-TROL-CURE thin film calorimeter (TFC-9000™) measures the curability of inks, coatings and adhesives to ensure that they are curing consistently, batch-to-batch. By measuring the cure rate, it can determine the UV LED wavelengths needed to achieve the desired speed for each customer's specific process. It can also create a profile of adhesives and figure out the LED's needed to ensure cure, regardless of the adhesives' age.

UV PROCESS SUPPLY , 800/621-1296, www.uvprocess.com

Detects metals in plastics

The grinder/shredder feed conveyor from co. catches ferrous and nonferrous metal contaminants in conveyed materials. This unit is designed to detect tramp metal in virgin plastics, rubber and recycled materials. It will be previewed at NPE 2006, June 19–23 in Chicago.

BUNTING MAGNETICS, CO. , 800/835-2526, www.buntingmagnetics.com

Evaluates flexo plates, films and printed sheets

The FlexoCam is a quality control tool for evaluating flexographic plates, film and mask, and printed sheets. On the plate, relief height, dot percentage, screen rulings and angles can all be measured, either on a flat plate or on the cylinder. The same measurements can be done for the film, mask and printed sheets. Its detailed readings help ensure that errors are eliminated from plate production and can serve as an arbitrator in disputes regarding print quality, co. says.

TROIKA SYSTEMS , 44/1793-766-355, www.troika-systems.com

Ideal for cleanrooms

Co. introduces two temperature and humidity monitoring technology, TH8 line of 8-in. temperature/humidity chart recorders and KT8 line of K-Thermocouple remote sensing 8-in. chart recorders. The TH8 has three different models and the KT8 has five. Users can opt to display temperature or humidity and specify preferred traceable calibration methods. The systems are ideal for tight locations, cleanrooms or incubators, co. says.

DICKSON CO. , 630/543-3747, www.dicksonweb.com

For sheetfed or web applications

The KeyColor T System is a compact ink control system that provides touch screen control of fountain ink keys for sheetfed or web applications. Press operators are able to quickly adjust ink key settings from a central ink desk to speed up makeready and reduce waste. When combined with AutoSet presetting software, it can use the digital data from an image setter or computer-to-plate system to preset all ink keys for even faster makeready. The system can also interface with color-measuring devices to provide closed-loop color solutions for web and sheetfed presses.

ESSEX PRODUCTS GROUP , 860/767-7130, www.epg-inc.com/ICS/