The new MPW300PS is a center surface winder capable of running hot stamping foil. Similar to the other MPW series machines, this model runs fully automatic. From time to time the tabbers will need to be replaced as well as filling up the core bulk hopper. The MPW300PS can be connected to the co.'s packaging lines with plugger, wrapper, and palletizer. Senntech, Inc.,860/651-1536, fax: 860/651-1561, www.senntech.com

The twin mandrel model GL & ED2/190 auto lathe slitter models convert pressure sensitive (PSA) tapes, foams, foils, films and many other materials without the need for the conventional unwinding and rewinding. A pivoting blade angle facility ensures that all rolls are slit squarely with surface finish. Two over-imposed blades with independent adjustment are used to maintain cutting forces to both the upper and lower logs. CMC Cevenini USA LLC, 410/796-7944, fax: 410/796-7919, www.cmccevenini.com

The Model 738/738 HC is a new technologically advanced slitter/rewinder capable of running extensible films, film laminates, pressure sensitive label stock and paper. This model is said to be loaded with time-saving features, which include pneumatic knives, a rewind roll pusher, a rewind unloading system and unwind roll lifts. A step-in platform allows easy access to the slitter knives, reports co. The PLC-based control system with AC Vector drives provides recipe storage and recall with Ethernet capabilities. All machine function is controlled through the latest in touchscreen technology with interlocks and safety guards providing for a high level of operator safety, states manufacturer. Stanford Products LLC, 618/548-2600, www.stanfordproductsllc.com

This new non-electric, "set and forget" efficient method of winding in either direction on any web including edge trim is now available with the Portable Winder. This heavy-duty winder is reportedly capable of handling any material. Winding speed follows the line of the material while its pneumatic drive system, without gears or clutches, allows for stop-go stalled motion. Micro-setting adjustments permit infinite speed and torque control. Can be mounted on or off machines at any angle or can be placed on a cart for use anywhere. Daven Industries Inc., 800/834-8848, fax: 973/808-8777, www.davenindustries.com

This co. now offers a new technologically advanced slitter/rewinder— the Revolution. With a segmented top-riding roll system, automatic cut-off and web advance, automatic knife positioning system, and a hard-stop core locating system, the Revolution is said to significantly reduce setup times. Dusenbery Worldwide, 973/366-7500, www.dusenbery.com

TWIN-CAT-2 is a label rewinder with two rewind spindles to handle multiple rewind cores for slitting, or to rewind finished label and waste matrix rolls for die-cut label matrix stripping operations. This rewinder is said to be maintenance-free and uses rugged, heavy-duty steel construction throughout, assuring trouble-free performance. Labelmate LLC, 877/833-7149, fax: 702/435-8536, www.labelmate.com

Jade is an individual arm, center surface slitter designed to operate at speeds of up to 1,000 meters/min. It is said to incorporate state-of-the-art Profibus communication to local drives; individual on-board AC digital drive with built-in PLC control for each arm together with a host of other innovations, such as dual arms that can run with one motor. The Jade has a vacuum main drive roller, and twin-drum rewind rollers. All rollers are motor-driven, which allows for individual control on draw from the display monitor. The rollers are chrome plated for durability and are line-speed driven. Ashe Converting Equipment, 01473-710912, fax: 01473-719137, www.ashe.co.uk

The new 12 in. wide system includes a cantilevered unwind to 26 in. diameter with auto edge guide and programmable tension control. The slitter includes entry and exit "S" wrap pull rolls for tension isolation and draw control. Also featured is the co.'s interchangeable shear assembly, which slits the tear tape down to 1 mm and an auxiliary rewind for excess material not traverse wound. Edge trim from each side of the web is removed by a traverse take-up. Each of the 12-cantilevered mini Smartwinder-2000™ traverse winding positions accommodates spools up to 5 in. wide x 8 in. OD. Independent Machine Co., 973/882-0060, fax: 973/808-9505, www.independentusa.com

The CS slitter/rewinder is designed for slitting plastic films, papers, cellulose films, laminates, supported and unsupported aluminum foil, and similar materials. A computer control can be supplied as an option on this machine. The parameters for a job are entered through the screen and the computer will set the operating instructions for the different functions of the machine. A wide range of other options are available to meet specific customer requirements. Comexi, S.A., 34/972-477-744, fax: 34/972-477-384, www.comexi.com

Sidewinder BSR2X is a dual-rewind slitter/rewinder, which is part of the Promax Series. This slitter/rewinder is capable of bulk slit at 40 in. to single 30 in. The Sidewinder is available in 10, 13, 16 and 18 in. widths with an unwind roll maximum of 40 in. in diameter. On this model, the electronic ultrasonic web guide is capable of sensing clear or opaque materials. Reversing capability for opposite rotation on rewind-core holders is possible as well as dual rewind for slitting and rewinding with dual arbor. The base unit slitting station includes three blade sets corresponding to customer choice. Aztech Machinery, 480/998-5409, fax: 480/951-8351, www.aztechmachinery.com

Co. announces its premium white top liner brightness has been increased from 76 to 80. The liner is post-printable and ideal for process, line art and high coverage solids, says co. Its compression strength matches that of the co.'s other white liners and also provides a smooth print surface. Available in basis weights of 31, 36, and 42. Smurfit-Stone Container Corp.,888/284-4470, fax: 804/843-5189, www.ssccboardsales.com

This co. custom tailored a new wet-laid nonwoven substrate made with Solvay Solexis Halar® ECTFE and Hyflon® MFA resins. The new high purity, inert and non-conductive nonwovens materials Cranemat® FM, containing Hyflon MFA, and Cranemat® FH, containing Halar ECTFE, perform well in difficult environments where chemical, electrical, and elevated temperatures cause most other materials to fail, reports co. Solvay Solexis, 856/251-3486, fax: 856/384-6126.

The new Trans-Kote® PGS and PGS-UV laminating films are especially manufactured for customers who want to bring additional post-lamination value to their printed pieces, reports co. Trans-Kote PGS and PGS-UV are high-clarity, aggressive adhesive, polyester-based films that have been chemically primed for post-lamination printability, embossing and foil- and hot-stamping for graphic impressions, as well as gluing for those print applications that require folding. Transilwrap Co., Inc., 847/678-1800, fax: 847/233-0199, www.transilwrap.com

A new swatchbook of Sterling® Ultra C1S papers is available. Sterling Ultra C1S papers feature balanced blue-white styling and ink holdout, giving printed materials a crisp, clean look with high printed gloss, vivid graphic reproduction and sharp images, reports co. Its unique aesthetics are said to make Sterling Ultra C1S a preferred choice for a wide range of print work including litho lamination, glue-applied labels, pressure-sensitive facestock, specialty packaging, foil lamination, gift wrap and specialty converting processes. MeadWestvaco Corp., 800/638-3313, www.MeadWestvacoPapers.com

This co. moves forward with its Raflacoat paper line to a renewed face paper. It is said to have the highest whiteness available for any mid-gloss paper. Both its roll and sheet products have been improved. Raflacoat is suitable for universal end-use applications when combined with the co.'s multifunctional RP 51 adhesive. Raflatac, 358/204-16143, fax: 358/204-168136, www.raflatac.com

Silico SW, a silicone base paper, has a face that is double clay-coated to guarantee a homogeneous, smooth silicone side and to minimize silicone consumption. Silico SW also has a reverse side treatment, i.e. it is slightly coated to ensure lay-flat properties during conversion. Cham Paper Group, 41/41-785-3333, fax: 41/41-785-3150.

This co. adds Fasson Tattoo Paper and Fasson 1-mil PET Easy Release liner to its Fasson Rapid-Roll product line. This water-release paper and companion cover sheet liner were engineered for the printing of temporary skin tattoos, which can be flexo, litho or screen printed. Avery Dennison, 800/944-8511, fax: 440/358-4943, www.na.fasson.com

The new 45-gauge Torayfan PC-2, a high-barrier metallized OPP film, is said to provide exceptional metal adhesion and high-yield economics for packaging laminations. Typical applications include multilayer laminations for liquid pouches and stand-up pouches, as well as cold-seal laminations. Toray Plastics, Inc., 401/294-4511, fax: 401/294-1480.

Tundra™ HD is an HDPE film constructed with the narrow-web flexo converter in mind. Superior roll profile and higher MD tensile strength are the main attributes of this corona-treated substrate, reports co. Tundra HD is stocked in the co.'s Roll Express™ program in both 7.5-mil and 10-mil thickness, but it is available in almost any caliper desired. Contract Converting LLC, 800/734-0990, fax: 800/724-0994, www.contractconverting.com

PrimeScan™ is a white, matte, top-coated, polyethylene film designed for use in both prime and variable markets. The co. says PrimeScan offers greater opacity compared to similar thicknesses of coated papers for less show-through of substrate, cleaner graphics and readability. Spinnaker Coating, LLC, 800/543-9452, fax: 937/332-6518, www.spinnakercoating.com

S10 is a fluorinated polysiloxane system, which is a thermally cured release coating on 1.5- to 3-mil polyester film for use with silicone pressure-sensitive adhesives. Typical applications include high-temperature or medical tapes and other specialty tapes and labels. CPFilms, 888/273-4567, www.cpfilms.com