Online: Go to www.convertingmagazine.com

Fax: Enter the corresponding product numbers into the Reader Reply Form in this issue. Fax it toll-free to 800/334-2812.

Phone: All Reader Reply items list telephone and fax numbers. Many include Web site addresses. Call suppliers directly and mention Converting.

First portable device

The new Minolta CM-2600d portable spectrophotometer for color measurement is part of the Enhanced Performance Technology™ line. This instrument features d/8 deg, 52 mm dia. integrating sphere, dual-beam geometry; 360 to 740 mm wavelength range with 10 nm measurement intervals; selectable 3 mm and 8 mm measurement areas; illuminated sample viewfinder; and large, 64 x 240 LCD display.

Minolta Corp., 201/529-6060, fax: 201/529-6070, www.minoltaspectrophotometers.com

Enter 330 or Inquire Online

Reduces back injuries

A new two-station Rotating Roll Handling device, the Rol-handlR, is for rolls weighing up to 2,000 lbs. The dual lift stations, with two pivot points, allow a roll to be readily maneuvered into true vertical and true horizontal positions. These help eliminate damage to roll edges, allowing rolls to be securely and safely placed in the desired positions.

Converter Accessory Corp., 800/433-2413, fax: 610/863-7818, www.handleyourweb.com

Enter 309 or Inquire Online

For affordability

The new ERH-300-P portable electric roll-handling machine combines high quality, low cost and ease of use to maximize productivity and safety. The product design features high-speed lifting and turning for safe and efficient palletizing, loading and unloading of rolls up to 300 lbs.

Schlumpf, Inc., 207/893-1903, fax: 207/893-1905, www.schlumpf-inc.com

Enter 306 or Inquire Online

Creates thread forms on substrates

The OSG D-Bar uses unusual roll-forming technology to create thread forms on various materials without using traditional wire wrapping. A range of shapes and pitches can be made including standard waves, long-life W forms, flat-bottomed P forms and wire-type R forms. The D-Bar reportedly gives better control of the amount of solution to be coated, no pitch error between bumps and a longer working life without wire-cut problems. Dimensions offered: up to 322 in. long, diameters from 0.16-2.0 in., and pitches down to 1/500 in.

OSG Tap & Die Inc., 800/837-2223, fax: 800/837-3334, www.oag-sossner.com

Enter 311 or Inquire Online

For early defect detention

The new Colourscan range of automatic defect detection systems improves output quality while reducing production costs associated with material waste and rejected output. A key feature is the 3-chip Sony CCD, RGB camera with an integral motorized zoom lens and +5 optically ground dioptre for minimum chromatic aberration.

Tecscan Electronics Ltd., 44/01443-821-552, www.tecscan.demon.co.uk

Enter 313 or Inquire Online

For large-size capacities

The co.'s laminators are an efficient way to apply material to substrates. The product operates at high speeds and large-size capacities, and can operate from a roller or inline. Standard features include variable speeds, adjustable nip roll pressure, adjustable tension control and liner rewind.

CONTECH, 800/961-6449, fax: 316/722-2976, www.contech-usa.com

Enter 312 or Inquire Online

For precise dispensing

The Robond is a microprocessor-controlled fluid-application system for precise dispensing of adhesive and fold—softening fluids in web presses. Even at high machine speeds of 1,000 m/min., the system applies glue on either an intermittent or continuous basis.

Valco Cincinnati, 513/874-6550, www.valcocincinnati.com

Enter 305 or Inquire Online

Replaces foam tape

Designed to provide repeatable print performance throughout the press run, the new Imaging-Blankit is a drop-in replacement for foam tape. The sheet of elastomeric material is sized to fit around the printing cylinder or sleeve and minimizes high and low spots that may cause poor print. Imaging-Blankit acts as a shock absorber and cushions directly or indirectly under a flexographic printing plate to compensate for variations in thickness, height and centricity of the cylinder. Unlike sticky back tapes, Blankit is a semi-permanent solution, not disposable.

Imaging Intl., Inc., 954/725-5885, fax: 954/725-5890, www.imagingintl.com

Enter 310 or Inquire Online

For broad applications

Spreader bars are used in broad applications to remove wrinkles from webs. The spreaders offer advantages that bowed rollers do not. They function at very low web tensions so that thin or fragile webs don't stretch. Web tracking is eliminated because they are not moving.

Pearl Technologies, Inc., 315/365-3742, fax: 315/365-3433.

Enter 307 or Inquire Online

For rapid plate changes

The Advantage R520 and R680 provide flexible packaging printers with an effective alternative to gravure. The machine employs a unique sleeve system for rapid, economical plate and blanket size changes. Repeat lengths are changed by changing plate and blanket sleeves.

Matik North America, 860/232-2323, www.matik.com

Enter 308 or Inquire Online

For single-print stations

The quick-change inking conversion kit for Mark Andy 830 CI flexo presses is now offered for single-print stations. The QC system slides in and out on tracks allowing for lift-out anilox removal and fast cleanup out of the press.

Exflexo Products, 877/393-5396, fax: 785/273-0076, www.exflexo.com

Enter 314 or Inquire Online