Online: Go to www.convertingmagazine.com

Fax: Enter the corresponding product numbers into the Reader Reply Form in this issue. Fax it toll-free to 800/334-2812.

Phone: All Reader Reply items list telephone and fax numbers. Call suppliers directly and mention Converting.

Nordson Corp., 440/985-4000.

The new UV curing system provides high lamp output while generating less heat to the substrate. The patented QuadCure system is designed for high-speed printing and applications that benefit from high UV output and reduced heat. Reflectors include a dichroic coating, which reflects UV light, but not heat-generating infrared waves. The system uses air-cooling for the lamp and water-cooling for the housing.

Enter 418 or Inquire Online

Dr. Hönle UV-Technologie, 44/1922-457397, www.honleuv.co.uk

The UVAPRINT HP™ UV curing system can be supplied for almost any narrow- and mid-web, in-line presses in web widths up to 88 in. Cold mirror technology and heat management options can be added to permit heat sensitive substrates to be run. The UVAPRINT HP is designed to cure inks on traditional narrow- and mid-web substrates for labels and business forms, with the option of running thermal papers and low gauge films. Systems for UV flexo for folding cartons are also offered if needed.

Enter 417 or Inquire Online

C.A. Litzler Co., Inc., 216/267-8020, fax: 216/267-9856.

The Perfect Float® flotation dryer features a Coanda style air bar with a continuous slot, which promotes even drying and is fastened with a single clip for easy removal. The dryer offers several retraction options including internal, split hood, and clamshell. Other benefits include vapor-proof panel construction, aerodynamic header systems for balanced temperatures and air flows.

Enter 420 or Inquire Online

Sherman Treaters Ltd., 01/844-213686, fax: 01/844-217172, www.shermantreaters.co.uk

The treater system features a GX100R 10kW generator complete with a specially designed high-tension transformer. This addresses the significantly higher current draw required to maintain a strong corona over wide air gaps. The generator is also fully equipped with factory standard digital display of net power, reactive power and auto-adjust frequency for matching impedance.

Enter 412 or Inquire Online

Hanovia, 908/789-1880, fax: 908/654-1027, www.hanovia-uv.com

UV curing systems for a variety of photocurable products offer increased efficiency, reliability and simplicity. They require less floor space, provide better accessibility and easier maintenance. Additional features include replaceable reflector elements, multi-level lamp power and easy-to-see and use controls.

Enter 413 or Inquire Online

QC Electronics, Inc., 608/742-1661, fax: 608/742-3122, www.qcelectronics.com

The new QC AdvantageXT line of bare- and covered-roll corona-treating systems is said to deliver higher dyne levels. Models are available to treat any material at any size-conductive or non-conductive. They are also said to have a steady watt density as well as longer dwell times.

Enter 414 or Inquire Online

Tantec, Inc., 800/3TANTEC, fax: 847/524-6956, www.tantecusa.com

The Tantec Vacutec system operates by creating a plasma discharge under vacuum. It is ideal for surface activation on complex shaped plastic and rubber products, as well as for metal degreasing. The size of the vacuum chamber can be customized to meet the required output capacity and to access larger products. All process parameters are adjustable and automatically controlled with a PLC, and the process data.

Enter 416 or Inquire Online

Prime UV, 630/681-2100, fax: 630/681-0022.

The new MINISCAN miniature UV processor is designed to fit on all narrow-web, wide-web and label presses, as well as compact spaces. It offers immediate curing of UV inks and UV coatings. The MINISCAN provides high-speed curing of UV abrasion resistant, chemical resistant coatings and is said to be easy to install. This processor is less than 4 in. the web or product direction and is ideal for limited space applications.

Enter 419 or Inquire Online

Enercon Industries Corp., 262/255-6070, fax: 262/255-7784, www.enerconind.com

The PlasmaTreat™ System provides optimal surface treatment and functionalization of films, foams, papers, conductive webs, nonwovens, wovens, metals and powders. It can be operated in the modes of plasma with controlled gas chemistry, Chemical Corona® and conventional corona. It allows all treated materials to maintain increased surface energies for extended aging periods following treatment, all without backside treatment. Wettability, printability and the adhesion properties of materials are enhanced for production yields and margins.

Enter 410 or Inquire Online

Corotec Corp., 800/423-0348, fax: 860/674-5229, www.corotec.com

This co. introduces a new product to its Uni-Dyne line of self-contained corona treating systems. The new table-top Uni-Dyne is a combined unwind station/sheet treating system designed especially for use in test laboratories for evaluation of coating/treating methods for printing applications. The system can be used for a wide variety of applications, including treating continuous web in unwind fashion, treating single sheets, single or double-sided treating, gas purging capability, and conductive and non-conductive materials.

Enter 411 or Inquire Online